What does tile flooring cost in Oregon? (2026, from a contractor’s real price book)
A typical porcelain tile floor in Oregon runs $8,061, overhead and profit included. That’s the typical job in our book (300 sf standard porcelain, tear out old vinyl, pull and reinstall baseboard): $4,113 in materials and $3,948 in labor.
Read that number right. It’s our book’s cost for the job plus 30% for the contractor’s overhead and profit. That’s how a bid gets built: cost first, overhead and profit on top. It isn’t your bid. Your contractor’s real markup, your house and your finishes all move it.
Small rooms with no tear-out come in lower. Our low job (150 sf standard porcelain, no tear-out, no baseboard work) comes to $3,649. Big rooms in premium tile with old tile torn out come in higher. Our high job (600 sf premium porcelain, tear out old tile, new baseboard) comes to $21,173. The table below spells out all three, so you can see which one looks like your house.
Every number here comes from the InstaBid estimating engine, run with no contractor’s private prices in it: just the book, itemized, with 30% added for overhead and profit. Labor rates in our book are set by state today, and we priced this page at a Portland zip code (97204).
Tile flooring cost in Oregon: low, typical, high
| Low | Typical | High | |
|---|---|---|---|
| The job | 150 sf standard porcelain, no tear-out, no baseboard work | 300 sf standard porcelain, tear out old vinyl, pull and reinstall baseboard | 600 sf premium porcelain, tear out old tile, new baseboard |
| Materials | $2,148 | $4,113 | $11,391 |
| Labor | $1,502 | $3,948 | $9,781 |
| Price, overhead and profit included | $3,649 | $8,061 | $21,173 |
All three are our book’s materials and labor for the job, plus 30% for the contractor’s overhead and profit. Every figure is rounded on its own (dollars to the dollar, unit rates to the cent), so lines won’t always add to the penny.
What moves the number
- Install labor. Tile is slow work: $10.01 a sq ft in our book, $3,003 on the typical 300 sq ft.
- Tile grade. Standard porcelain is $8.58 a sq ft, premium is $12.87. Our book orders 10% extra for cuts and breakage (330 sq ft of tile for a 300 sq ft floor).
- What comes up first. Vinyl comes up at $2.15 a sq ft. Old tile is $4.29, because it’s set in mortar and heavy to haul.
- Uncoupling membrane. $415.01 a roll in our book. The typical floor takes 2: $830.
- Baseboard. New baseboard on the high job: $521 for the molding and $1,201 to install it.
Line items people forget
- Uncoupling membrane: $830. Goes between the subfloor and the tile so the tile doesn’t crack when the floor moves.
- Thinset: $136 (7 bags). The mortar the tile sets in.
- Grout: $101.
- Sealer: $52. Seals the grout lines.
- Sundries: $163. One line for the small supplies every floor job uses.
If a bid you’re holding doesn’t mention these, ask whether they’re in there. A bid that leaves them out isn’t cheaper. It just shows up later.
Portland, Salem, Eugene, Bend: same labor rate today, here’s why
Our price book sets labor rates by state right now, not by city. So labor on tile flooring in Portland prices the same in our book as in Salem, Eugene or Bend. Real crews in different towns do charge differently. We’d rather tell you that than make up a city number we don’t have. When the book prices by city, this page will say so.
Want to see how a bid gets itemized, line by line? See it work
Compare: Tile flooring cost in Washington
How we know
Prices from InstaBid’s price book: 25,533 real prices across 11 trades, re-checked by 230+ automated estimates every day, regionally adjusted. Priced by John Dudley, 30-year general contractor. Every number on this page is the book’s cost for the job plus 30% for the contractor’s overhead and profit, run with no contractor’s private prices in it. InstaBid adds no markup of its own; the 30% stands in for what a contractor adds to his cost. Priced at a Portland zip (97204) on engine version 71e09637. Prices as of November 17, 2026.
Contractors: this is our book. Bid it with yours.
Put your own prices and markup in and bid this job in under two minutes. 10-day free trial, one trade.
Start your 10-day free trial
Phone ringing and nobody answering? For $500, John will audit how your calls, forms and follow-ups get handled and give you the fixes in writing. Call John: (541) 442-2520.
Book the $500 audit
Homeowners: want a real number for your house?
The real number for your house comes from your contractor’s bid. Want to know what a good one looks like? See how InstaBid itemizes a job, line by line. No signup.
See it work
FAQ
Is this what I’ll pay?
Not exactly. $8,061 is our book’s cost for the typical job (300 sf standard porcelain, tear out old vinyl, pull and reinstall baseboard) plus 30% for the contractor’s overhead and profit. His real markup, your house and your finishes all move it. The number for your own house is his itemized bid, so ask him to itemize it.
Why is labor different in WA vs OR?
Our price book adjusts labor by state. On the same typical job, labor is $3,948 in Oregon and $4,128 in Washington, while materials are $4,113 and $4,242. Labor rates are set by state: every city in Oregon gets the same labor rate today.
Why does tearing out old tile cost more?
Because it’s set in mortar and it’s heavy. In our book, tearing out and hauling vinyl is $2.15 a sq ft. Old tile is $4.29 a sq ft: $2,574 on the 600 sq ft high job.
How often are prices updated?
We re-run every number on this page from our price book once a month, and again before any change to the page. Last run: November 17, 2026.
Priced by John Dudley, 30-year general contractor, founder of InstaBid and co-host of Around the House, heard on 200+ stations.
Stop losing jobs to paperwork.
Walk the job, talk it out, and you have a real itemized estimate in under two minutes. Ten days free, no card. Then $99 a month for one trade.
Start free →